Networking Accessories

Networking Accessories
Products: (  1 - 12 of 18  )
:
:
  • TP-LINK MC111CS 10/100MBPS WDM MEDIA CONVERTER
    Compare
    Product Code: 7051373

    The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINKs media converter MC112CS is just one of the examples to cooperate with MC111CS Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19 inch system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers Complies with 802.3u 10/100Base-TX, 100Base-FX standards Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Adopts WDM technology, transmitting and receiving data on one single fiber Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Adopts WDM technology, transmitting and receiving data on one single fiber Extend fiber distance up to 20km Easy-to-view LED indicators provide status to monitor network activity easily External power supply Adopts WDM technology Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Extends fiber distance up to 20km OEM: NWTL-MC111CS

    [Expand]

    $66.75 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051373
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-ANT2415D 2.4GHZ 15DBI OUTDOOR OMNI-DIRECTIONAL ANTENNA
    Compare
    Product Code: 7051393

    Outdoor omni-directional antenna TL-ANT2415D operates in the 2.4-2.5 GHz band and provides 15dBi omni-directional operation, which largely extends the wireless range and delivers much better wireless performance The antenna offers the N female connector guaranteeing wider compatibility with most of the wireless equipments. Also, the weather proof design ensures that it can work normally for various demanding outdoor solutions The Outdoor Omni-Directional Antenna emits a powerful amplified signal over a 360 degree radius, delivering a strong multidirection signal from an Access Point or a Bridge. If you have multiple locations or buildings where you would like to integrate your wireless network, simply place the TL-ANT2415D in between the buildings with your Acess Point. It is most effective when placed at the top of buildings Installation of the TL-ANT2415D is simple and straight forward. It is compatible with most wireless devices (Access Points, Routers, Bridges and Network Adapters) on the market with removable external antennas 15dBi omni-directional operation highly enlarges the wireless coverage N female connector, compatible with most of the wireless equipments Weather proof design, suitable for all weather condition Provided mounting kits enable easy installation for various environments Frequency: 2.4GHz~2.5GHz Impedance: 50 Ohms Gain: 15 dBi Radiation: Omni-directional VSWR(MAX.): Less than 2.0 HPOL Beamwidth: 360 degrees VPOL Beamwidth: 9 degrees Polarization: Linear, Vertical Connector: Type N Female Mounting: Pole Mount / Wall Mount Application: Outdoor Lightning Protection: DC Ground Operating Temp: -40 to 65 degC Storage Temp: -40 to 80 degC Operating Humidity 10% to 90% non-condensing Storage Humidity 5% to 90% non-condensing Safety, Emission and Others: CE, FCC, Compliant with RoHS Package Contents: 15dBi Outdoor Omni-directional Antenna, Installation mounting kits, User Guide Dimension: 1500mm Weight: 0.6kg OEM: NWTL-ANT2415D

    [Expand]

    $102.00 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051393
    Invalid quantity
    Compare
    Compare
  • TP-LINK MC110CS 10/100MBPS SINGLE-MODE MEDIA CONVERTER
    Compare
    Product Code: 7051398

    The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINKs 19 inch system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers Complies with 802.3u 10/100Base-TX, 100Base-FX standards Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port Extends fiber distance up to 20km MEDIA CONVERTER AND MODULE Standards and Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function: Half/Full-Duplex transfer mode for FX port, Full Duplex Flow Control (IEEE 802.3x), Half Duplex Flow Control (Backpressure), Extends fiber distance up to 20km, Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Ports: 1 x 100M SC/UPC port, 1 x 100M RJ45 port (Auto MDI/MDIX) Wave Length: 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100 ohms STP (maximum 100m) Network Media 100 BASE-T UTP category 5, 5e cable (maximum 100m), EIA/TIA-568 100 ohms STP (maximum 100m) Network Media: 100 BASE-FX Single-mode Fiber LED Indicators: PWR, FDX/Col, Link/Act, SPD Dimensions: 94.5(W) x 73.0(D) x 27.0(H)mm) Power Supply: External power supply Max Power Consumption: 1.52W Safety and Emission: FCC, CE, RoHS Environment Operating Temperature: 0 to 40 degC, Storage Temperature: -40 to 70 degC, Operating Humidity: 10% to 90% non-condensing, Storage Humidity: 5% to 90% non-condensing OEM: NWTL-MC110CS

    [Expand]

    $55.85 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051398
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-ANT2408CL 2.4GHZ 8DBI INDOOR OMNI-DIRECTIONAL ANTENNA
    Compare
    Product Code: 7051409

    Indoor omni-directional antenna TL-ANT2408CL operates in the 2.4-2.5 GHz band and provides 8dBi omni-directional operation, which largely extends the wireless range and delivers much better wireless performance. The antenna offers the RP-SMA Female connector guaranteeing wider compatibility with most of the wireless equipments Replacing your wifi antenna with TL-ANT2408CL will significantly increase the range and strength of your wifi signal. This quality built omni-directional antenna is a direct replacement for the antenna that comes standard with your router, access point. Because it is omni-directional, no aiming is equired - it can send and receive wifi in all directions Installation is very easy - just detach your devices factory antenna and attach our booster antenna and youll experience an instant increase in signal coverage and stability. Please note that the increase in signal strength depends mostly on your router or adapter; upgrading the antennas helps but the signal cannot transmit or receive at a level that your modem or adapter does not have Very easy to install, no software required 8dBi Omni-directional operation boosts your signal to a higher range RP-SMA Female connector, works with device with RP-SMA Male connector Frequency: 2.4GHz Impedance: 50 Ohms Gain: 8 dBi Radiation: Omni-directional VSWR(MAX.): 1.92:1 HPOL Beamwidth: 360 degrees VPOL Beamwidth: 15 degrees Polarization: Linear, Vertical Mounting: Desktop / Fixed on metal surface Application: Indoor Operating Temp: -20 to 65 degC Storage Temp: -30 to 75 degC Operating Humidity: 10% to 90% non-condensing Storage Humidity: 5% to 90% non-condensing OEM: NWTL-ANT2408CL

    [Expand]

    $13.40 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051409
    Invalid quantity
    Compare
    Compare
  • TP-LINK CPE210 2.4GHZ 300MBPS 9DBI OUTDOOR CPE
    Compare
    Product Code: 7051416

    Built-in 9dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 27dBm/500mw System-level optimization for more than 5km long range wireless transmission TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications Centralized Management System - Pharos Control AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes Outdoor stabilized enclosure with IPX5 waterproof certification Dual Ethernet ports and grounding terminal integrated 6KV Lightning Protection, 15KV ESD Protection Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security Selectable bandwidth of 5/10/20/40MHz Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools Easy antenna alignment with wireless signal quality indicators via Web interface HARDWARE FEATURES Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory: 64MB DDR2 RAM, 8MB Flash Interface: 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1 Grounding Terminal, 1 Reset Button Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range: 16-27VDC Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable Dimensions: 224(W) x 79(D) x 60(H)mm Antenna Type: Built-in 9dBi 2x2 Dual-polarized Directional Antenna, Beam Width: 65 degree (H-Plane) / 35 degree (E-Plane) Protection: 15KV ESD Protection, 6KV Lightning Protection Enclosure: Outdoor ASA stabilized plastic material, IPX5 waterproof Certification WIRELESS FEATURES Wireless Standards: IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds: Up to 300Mbps (40MHz,Dynamic), Up to 144.4Mbps (20MHz,Dynamic), Up to 72.2Mbps (10MHz,Dynamic), Up to 36.1Mbps (5MHz,Dynamic) Frequency: 2.4 to 2.483GHz, Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used Transmission Power: 27dBm/500mw (Adjustable power by 1dBm), Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used SOFTWARE FEATURES Wireless Configurations: Pharos MAXtream TDMA Technology, 802.11b/g/n Modes, Selectable Channel Width: 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter, Wireless Advanced: Beacon Interval/RTS Threshold/Fragmentation, Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management: Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server System Tools: Wireless Signal Quality Indicators:, Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications, Hardware watch dog POE ADAPTER FEATURES Dimensions: 110 x 57 x 33.5mm Input Current: 0.8A Max at 100VAC Input Voltage: 100VA to 240VAC at 50Hz to 60Hz Output: 24VDC, 1.0A Max, +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency: Greater than 80% Output Voltage: 24VDC(+4,5pins; -7,8pins) Input: 100-240V AC, 50/60Hz Power Status LEDs: 0 to 0.8A: Green, 0.8A to 1.0A: Red Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark Interfaces: 1 AC Jack with Earth Ground, 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data), 1 10/100/1000Mbps Shielded Ethernet Port (Data) Button: Remote Reset Button OTHERS Certification: CE, FCC, RoHS, IPX5 Package Contents: Outdoor Wireless CPE, 24V 1A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux., Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended Environment: Operating Temperature: -30 to 70 Deg C, Storage Temperature: -40 to 70 Deg C, Operating Humidity: 10% to 90% non-condensing, Storage Humidity: 5% to 95% non-condensing OEM: NWTL-CPE210

    [Expand]

    $102.00 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051416
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-POE10R POE SPLITTER
    Compare
    Product Code: 7051477

    The PoE Splitter TL-POE10R fully complies with IEEE 8023af standard Can work with all IEEE 8023af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINKs TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc OEM: TLPOE10R

    [Expand]

    $28.75 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051477
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-ANT2424B 2.4GHZ 24DBI GRID PARABOLIC ANTENNA
    Compare
    Product Code: 7051479

    Grid parabolic antenna TL-ANT2424B is designed for the spread spectrum system, operates in the 2.4-2.5 GHz band and provides 24dBi directional operation. The surface design with welded-steel reflector to bring out the best performance. This antenna features high gain, long coverage, light weight, compact structure and excellent wind-resistance. It is used for outdoor and the range is up to 56 km Easy To Use- Installation of the TL-ANT2424B is simple and straight forward. It is compatible with most wireless devices (Access Points, Routers, Bridges and Network Adapters) on the market with removable external antennas 24dBi directional operation, ideal for extraordinary long-distance outdoor directional connection Weather proof design, suitable for all weather conditions N Female connector, applicable in most outdoor solutions Provides easy installation mounting kits Weight: 3.5kg Frequency: 2.4GHz Gain: 24dBi VSWR(MAX.): 1.5:1 HPOL Beamwidth: 10 VPOL Beamwidth: 14 Polarization: Linear; Vertical Type: Directional Connector Type: N Female(Jack) Extended Cable/Length: 30cm Mounting: Pole Mount Application: Outdoor Approximate Range at 1/11/54Mbps, 56km/31.5km/4.44km Operating Temp: -40 to +60 Deg C Storage Temp: -40 to +60 Deg C Optional Accessory: TL-ANT24EC6N, TL-ANT24EC12N, TL-ANT24SP, TL-ANT24PT Package Contents: 24dBi Grid Parabolic Antenna, Installation mounting kits, User Guide Dimension: 1000 x 600mm OEM: NWTL-ANT2424B

    [Expand]

    $99.85 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051479
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-SM311LS MINIGBIC MODULE
    Compare
    Product Code: 7051489

    The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost Supports Full-Duplex Plug-and-Play Supports Pull-or-Plug with power on switches Power: internal power from switches Single-mode MiniGBIC module Applied to T3700G-28TQ, TL-SG5412F/TL-SG5428, TL-SL5428E,TL-SG3210/TL-SG3216/TL-SG3424/TL-SG3424P,TL-SL3428/TL-SL3452, TL-SG2210P/TL-SG2216/TL-SG2424/TL-SG2424P/TL-SG2452, TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 and MC220L OEM: NWTL-SM311LS

    [Expand]

    $72.75 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051489
    Invalid quantity
    Compare
    Compare
  • TP-LINK HA100 BLUETOOTH MUSIC RECEIVER
    Compare
    Product Code: 7051493

    Stream music wirelessly from your smartphone/tablet to any stereo/stand-alone speaker via Bluetooth Connect with your Bluetooth or NFC-enabled device, using the HA100 or NFC Tag Connects to any stereo supporting 3.5mm or RCA jacks Transmits up to 20 meters (66 feet) away, within direct line of sight Bluetooth 4.1, compatible with all A2DP stereo Bluetooth devices HARDWARE FEATURES Power Supply 5V 1A USB Power Dimensions: 66.5(W) x 60.5(D) x 18.5(H) mm WIRELESS FEATURES Bluetooth Range: 20 meters Bluetooth Version: 4.1 OTHERS Package Contents Bluetooth Music Receiver, Power Adapter, 3.5mm-to-3.5mm AUX cable, 3.5mm-to-RCA cable, NFC Tag, Quick Installation Guide Box Dimensions: 135(W) x 95(D) x 70(H)mm OEM: NWTL-HA100

    [Expand]

    $54.75 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051493
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-POE150S POE INJECTOR
    Compare
    Product Code: 7051495

    The PoE Injector TL-POE150S fully complies with IEEE 8023af standard Can work with all IEEE 8023af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINKs TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc OEM: TLPOE150S

    [Expand]

    $37.50 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051495
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-PS110P SINGLE PARALLEL PORT FAST ETHERNET PRINT SERVER
    Compare
    Product Code: 7051516

    The TP-LINK TL-PS110P print server allows you to take the computer out of the loop while setting up a printing network. All that is needed is to connect the TL-PS110P to a printer via the parallel port, connect the print server to your LAN, and you will be able to access your printer from any computer on the LAN TP-LINK print servers are compatible with most majorities of printers on the market. At the same time, we also make sure to keep our products up to date with new models of printers TP-LINK print servers feature high-speed microprocessor and USB 2.0 port to ensure user printing jobs are processed both effectively and rapidly TP-LINK print servers support a majority of operating systems including Windows, Netware, Unix/Linux, and Mac. Also TP-LINK print servers support a number of network protocols including TCP/IP, IPX/SPX, NetBEUI, Apple Talk, LPR, IPP/SMB, RAW TCP, increasing the width of application Compatible with up to 230 printer models on the market Supports multi-protocol and multi-OS, easy to set up in almost all network environments Supports POST (Power On Self Test) and E-mail Alert, to help identify printing problems as soon as possible Simple setup and management, very easy to operate Compact and smart design, can be located almost anywhere Interface: Parallel Port, Fast Ethernet RJ-45 Port Advanced Features: DHCP Client, POST(Power On Self Test), Firmware Upgradable, Windows-Based Utility System Requirements: Windows 9x/ME, Windows NT/2000/XP/Vista/7/10, Mac OS 8.1 or Later, UNIX/Linux, Netware 3.12 or Later OEM: NWTL-PS110P

    [Expand]

    $81.75 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051516
    Invalid quantity
    Compare
    Compare
  • TP-LINK TL-ANT2412D 2.4GHZ 12DBI OUTDOOR OMNI-DIRECTIONAL ANTENNA
    Compare
    Product Code: 7051392

    Outdoor omni-directional antenna TL-ANT2412D operates in the 2.4-2.5 GHz band and provides 12dBi omni-directional operation, which largely extends the wireless range and delivers much better wireless performance The antenna offers the N female connector guaranteeing wider compatibility with most of the wireless equipments. Also, the weather proof design ensures that it can work normally for various demanding outdoor solutions The Outdoor Omni-Directional Antenna emits a powerful amplified signal over a 360 degree radius, delivering a strong multidirection signal from an Access Point or a Bridge. If you have multiple locations or buildings where you would like to integrate your wireless network, simply place the TL-ANT2412D in between the buildings with your Access Point. It is most effective when placed at the top of buildings Installation of the TL-ANT2412D is simple and straight forward. It is compatible with most wireless devices (Access Points, Routers, Bridges and Network Adapters) on the market with removable external antennas 12dBi omni-directional operation highly enlarges the wireless coverage N female connector, compatible with most of the wireless equipments Weather proof design, suitable for all weather condition Provided mounting kits enable easy installation for various environments Frequency: 2.4GHz~2.5GHz Impedance: 50 Ohms Gain: 12 dBi Radiation: Omni-directional VSWR(MAX.): Less than 2.0 HPOL Beamwidth: 360 degrees VPOL Beamwidth: 12 degrees Polarization: Linear, Vertical Connector: Type N Female Mounting: Pole Mount / Wall Mount Application: Outdoor Lightning Protection: DC Ground Operating Temp: -40 to 65 degC Storage Temp: -40 to 80 degC Operating Humidity 10% to 90% non-condensing Storage Humidity 5% to 90% non-condensing Safety, Emission and Others: CE, FCC, Compliant with RoHS Package Contents: 12dBi Outdoor Omni-directional Antenna, Installation mounting kits, User Guide Dimension: 1200mm Weight: 0.5kg OEM: NWTL-ANT2412D

    [Expand]

    $81.75 EACH
    SKU
    Quantity
    Online Availability
    Compare
    7051392
    Invalid quantity
    Compare
    Compare